Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Chemglass Life Sciences PTFE Tubing, 5mm I.D. x 12"
PTFE Tubing, 5mm I.D. x 12in, Adapter, Fritted Inlet Feed.
Sklar Instruments Sterilization Sklar Microscopy Surgical 100/PK
Sterilization Sklar Microscopy Surgical 100/PK
MSC Checkers Wheel Chock, Polyurethane, 11-1/2 in. OAL, 50,000 lb Load Capacity
The general-purpose UC1500-4.5 wheel chock is manufactured with highly durable, lightweight polyurethane. It is designed for use with over-the-road trucks, trailers, pickups, and utility vehicles, rated for vehicles with tire sizes up to 46 in. diameter and a gross operating weight up to 50,000 lb.
- Highly durable, lightweight polyurethane construction.
- Third-party tested and certified.
- Ideal for over-the-road trucks, trailers, pickups, and utility vehicles.
- Rated for tire diameters 32 in. to 46 in.
- Rated for gross vehicle operating weight up to 50,000 lb.
- Resistant to oils, fuels, solvents, and other chemicals.
- Recessed carrying handle.
- Mounting hole for ropes, chains, or brackets.
- High-visibility orange color.
Grainger Hose Fitting Sleeve 7/8 In
The Aeroquip Compression Sleeve Brass is a brass compression sleeve fitting used for creating leak-proof connections in fluid transfer applications. It has a 1/4" NPT female pipe thread on one end and a compression connection on the other end to connect to 1/4" OD tubing. The compression sleeve is made from brass for corrosion resistance. This fitting allows a tubing connection without flaring and can handle pressures up to 5000 psi. It is commonly used in hydraulic, pneumatic, lubrication, and industrial process systems.
Ace Glass, Inc. FEP tubing, 1/8in OD x 1/16in ID, 10ft length
1/8 O.D. x 1/16 I.D. FEP tubing made of high molecular weight resin for excellent stress crack resistance. Meets FDA requirements for repeated food contact. Chemically inert to most industrial chemicals and solvents. 10ft length.
AVANTOR MASTERFLEX (VWR LLC) MFLEX TUBING CHEM BIO 35 50FT
Masterflex L/S High Performance Precision Pump Tubing, Chem-Durance Bio, L/S 35; 50 ft, Avantor